Mimaki DS 1600
& DS 1800 series
Imprimantes Numérique Textile
Introducing a high resolution
system which is more ecologically friendly and provides
more efficient operation as compared to traditional
sublimation transfer systems.
Characteristics
High, sharp print quality
Direct printing provides fine lines and sharp edges
compared to using transfer system.
Environmental-friendly
No need to use transfer paper.
Reduced cost
This system requires no transfer paper or liner paper.
Its running costs are much lower than the cost of traditional
transfer systems.
Improved efficiency of the operation
The system avoids cockling of printed transfer paper
and mistakes made by wrinkling transfer paper when transferring
the ink onto fabric.
Equipped with media take-up device and media feeder
with a dancer roller
The tension bar moves up and down to adjust proper feeding.Suitable
for continuous operation.
Ditch for penetrated ink
In order to prevent ink from penetrated the fabric from
marking other fabrics, a ditch is available.
High-speed print heads
The head configuration employs array of two staggered
print heads.
1-way (single ink set) for fast printing and 2-way (dual
ink set) for multipurpose printing are available. In
addtion both print modes can use either high speed print
of 4-color or high quality print of 6-color.
Fabric supply mechanism
In addition to the drive roller and friction roller,
the take-up unit and feeding unit with a dancer roller
cause tension in the fabric to prevent it from wrinkling.
The fabric retainer holds both edges of the fabric preventing
it from touching the print head.
DS-1600
Maximum printing width / 1,620mm (63.7")
DS-1800
Maximum printing width / 1,850mm (72.8")
|
|
DS-1600 |
DS-1800 |
| Printing
head |
Method |
Piezo-electric drop on demand |
Nozzle
configulation |
Eight heads (4 x 2 lines, stagger arrangement) |
| Number
of nozzles |
<6-color print> 1-way: 360 nozzles 2-way:
180 nozzles |
| <4-color print> 1-way: 720 nozzles 2-way:
360 zozzles |
| Resolution |
360, 540, 720 dpi |
| Maximum
printing width |
1620mm(60.7") |
1850mm(72.8") |
| Head
height adjustment |
1.2mm (0.04") to 10mm (0.39") |
Print
Modes
1*) |
6-color
printing |
360 x 360 dpi : 2 / 4 / 8 passes, unidirection
/ bidirection |
| 360 x 540 dpi : 3 / 6 / 12 passes, unidirection
/ bidirection |
| 360 x 720 dpi : 4 / 8 / 16 passes, unidirection
/ bidirection |
| 720 x 720 dpi : 4 / 8 / 16 passes, unidirection
/ bidirection |
| 4-color
printing |
360 x 360 dpi : 1 / 2 / 4 passes, unidirection
/ bidirection |
| 360 x 540 dpi : 3 / 6 / 12 passes, unidirection
/ bidirection |
| 360 x 720 dpi : 2 / 4 / 8 passes, unidirection
/ bidirection |
| 720 x 720 dpi : 2 / 4 / 8 passes, unidirection
/ bidirection |
| Ink
type |
Sublimation
dye
ink |
Color (black, cyan, magenta, yellow, light cyan,
light magenta) |
Textile
pigment
ink |
Color (black, cyan, magenta, yellow) |
| Ink volume 2*) |
6 color print
1-way: 220cc x 2 / color, 2-way: 220cc x 1 / color
|
4
color print
1-way: 220cc x 4 / color, 2-way: 220cc x 2 / color |
| Fabric |
Type |
Polyester / Cotton 3*) |
| Width |
200mm (7.8") - 1650mm (64.9") |
200mm (7.8") - 1900mm (74.8") |
| Thickness |
less than 7mm (0.27") |
| Outside
diameter |
less than o 250 mm (9.84") |
| Roll
weight |
less than 30kg (66lbs) |
| Roll
inside diameter |
1.5" - 3" |
| Printing
surface |
Printing can be made on either side |
| Roll
end treatment |
Light adhesive tape is used to allow the paper
to be removed |
| Margin
(roll fabric) |
10mm (0.39") ±0.5mm (0.01"), left side and right
side |
| Interface |
IEEE 1394, IEEE 1284 |
| Command |
MRL-1E (ESC/PV.1 base) Mimaki original command |
Operational
environment |
Temperature |
15ºC ( 55ºF ) - 30ºC( 86ºF ) |
| Humidity |
35 - 65 % Rh ( no condensation ) |
| Power |
AC 100 - 240 V ±10% ( auto voltage ), 50 / 60
Hz ±1 Hz |
| Power
consumption |
less than 500W |
| Weight |
230kg (507lbs) |
250kg (551lbs) |
Outside
dimensions |
Width |
2750mm (108.3") |
3040mm (119.7") |
| Depth |
940mm (37.0") |
| Height |
1350mm (53.2") |
|
